Модуль Apache mod_proxy

Прокси/шлюз для HTTP/1.1 Расширение mod_proxy.c proxy_module

Предупреждение

Не включайте прокси с помощью ProxyRequests до тех пор пока вы не . Открытые прокси опасны как для вашей сети, так и для интернета в целом.

Даныый модуль реализует поддержку прокси/шлюза в Apache. Он реализует поддержку прокси для протоколов FTP, CONNECT (for SSL), HTTP/0.9, HTTP/1.0, and HTTP/1.1. Модуль может быть настроен для соединения с другими прокси модулями как для вышеперечисленных, так и для других протоколов.

Функционал прокси в Apache, разбит на несколько модулей, помимо собственно модуля : , и . Таким образом, когда вы хотите использовать одну или несколько функций проксирования, загрузите и соответствующий модуль(ли) на сервер либо статически (при компиляций) либо динамически через директиву LoadModule .

Помимо этого, расширенный функционал прокси обеспечивается другими модулями. Кэширование обеспечивается и относящимися к нему модулями. Работа с удаленными серверами по протоколу SSL/TLS обеспечивается директивами семейства SSLProxy* модуля . Эти дополнительные модули должны быть загружены и настроены чтобы эти функции заработали.

Прямые и обратные прокси

Apache может быть настроен для работы как в режиме прямого так и в режиме обратного прокси.

Обычный прямой прокси - это сервер посредник находящийся между клиентом и целевым сервером. Чтобы получить содержимое оригинального сервера, клиент отправляет запрос прокси серверу указывая оригинальный сервер как конечную цель а прокси затем запрашивает содержимре с оригинального сервера и возвращает его клиенту. Клиент должен быть специальным образом настроен на использование прямого прокси, чтобы получать доступ к другим узлам.

Типичный вариант использования прямого прокси это обеспечение доступа в интернет для внутренних клиентов сидящих за брандмауэром. Также прямой прокси может быть использован как кэширующий сервер (обеспечивается модулем ) для уменьшения нагрузки на сеть.

The forward proxy is activated using the ProxyRequests directive. Because forward proxys allow clients to access arbitrary sites through your server and to hide their true origin, it is essential that you so that only authorized clients can access the proxy before activating a forward proxy.

A reverse proxy, by contrast, appears to the client just like an ordinary web server. No special configuration on the client is necessary. The client makes ordinary requests for content in the name-space of the reverse proxy. The reverse proxy then decides where to send those requests, and returns the content as if it was itself the origin.

A typical usage of a reverse proxy is to provide Internet users access to a server that is behind a firewall. Reverse proxies can also be used to balance load among several back-end servers, or to provide caching for a slower back-end server. In addition, reverse proxies can be used simply to bring several servers into the same URL space.

A reverse proxy is activated using the ProxyPass directive or the [P] flag to the RewriteRule directive. It is not necessary to turn ProxyRequests on in order to configure a reverse proxy.

Basic Examples

The examples below are only a very basic idea to help you get started. Please read the documentation on the individual directives.

In addition, if you wish to have caching enabled, consult the documentation from .

Forward Proxy

ProxyRequests On
ProxyVia On

<Proxy *>
Order deny,allow
Deny from all
Allow from internal.example.com
</Proxy>

Reverse Proxy

ProxyRequests Off

<Proxy *>
Order deny,allow
Allow from all
</Proxy>

ProxyPass /foo http://foo.example.com/bar
ProxyPassReverse /foo http://foo.example.com/bar

Controlling access to your proxy

You can control who can access your proxy via the <Proxy> control block as in the following example:

<Proxy *>
Order Deny,Allow
Deny from all
Allow from 192.168.0
</Proxy>

For more information on access control directives, see .

Strictly limiting access is essential if you are using a forward proxy (using the ProxyRequests directive). Otherwise, your server can be used by any client to access arbitrary hosts while hiding his or her true identity. This is dangerous both for your network and for the Internet at large. When using a reverse proxy (using the ProxyPass directive with ProxyRequests Off), access control is less critical because clients can only contact the hosts that you have specifically configured.

FTP Proxy

Why doesn't file type xxx download via FTP?

You probably don't have that particular file type defined as application/octet-stream in your proxy's mime.types configuration file. A useful line can be

application/octet-stream   bin dms lha lzh exe class tgz taz

How can I force an FTP ASCII download of File xxx?

In the rare situation where you must download a specific file using the FTP ASCII transfer method (while the default transfer is in binary mode), you can override 's default by suffixing the request with ;type=a to force an ASCII transfer. (FTP Directory listings are always executed in ASCII mode, however.)

How can I access FTP files outside of my home directory?

An FTP URI is interpreted relative to the home directory of the user who is logging in. Alas, to reach higher directory levels you cannot use /../, as the dots are interpreted by the browser and not actually sent to the FTP server. To address this problem, the so called Squid %2f hack was implemented in the Apache FTP proxy; it is a solution which is also used by other popular proxy servers like the . By prepending /%2f to the path of your request, you can make such a proxy change the FTP starting directory to / (instead of the home directory). For example, to retrieve the file /etc/motd, you would use the URL:

ftp://user@host/%2f/etc/motd

How can I hide the FTP cleartext password in my browser's URL line?

To log in to an FTP server by username and password, Apache uses different strategies. In absense of a user name and password in the URL altogether, Apache sends an anonymous login to the FTP server, i.e.,

user: anonymous
password: apache_proxy@

This works for all popular FTP servers which are configured for anonymous access.

For a personal login with a specific username, you can embed the user name into the URL, like in:

ftp://username@host/myfile

If the FTP server asks for a password when given this username (which it should), then Apache will reply with a 401 (Authorization required) response, which causes the Browser to pop up the username/password dialog. Upon entering the password, the connection attempt is retried, and if successful, the requested resource is presented. The advantage of this procedure is that your browser does not display the password in cleartext (which it would if you had used

ftp://username:password@host/myfile

in the first place).

Note

The password which is transmitted in such a way is not encrypted on its way. It travels between your browser and the Apache proxy server in a base64-encoded cleartext string, and between the Apache proxy and the FTP server as plaintext. You should therefore think twice before accessing your FTP server via HTTP (or before accessing your personal files via FTP at all!) When using unsecure channels, an eavesdropper might intercept your password on its way.

Slow Startup

If you're using the ProxyBlock directive, hostnames' IP addresses are looked up and cached during startup for later match test. This may take a few seconds (or more) depending on the speed with which the hostname lookups occur.

Intranet Proxy

An Apache proxy server situated in an intranet needs to forward external requests through the company's firewall (for this, configure the ProxyRemote directive to forward the respective scheme to the firewall proxy). However, when it has to access resources within the intranet, it can bypass the firewall when accessing hosts. The NoProxy directive is useful for specifying which hosts belong to the intranet and should be accessed directly.

Users within an intranet tend to omit the local domain name from their WWW requests, thus requesting "http://somehost/" instead of http://somehost.example.com/. Some commercial proxy servers let them get away with this and simply serve the request, implying a configured local domain. When the ProxyDomain directive is used and the server is , Apache can return a redirect response and send the client to the correct, fully qualified, server address. This is the preferred method since the user's bookmark files will then contain fully qualified hosts.

Protocol Adjustments

For circumstances where you have a application server which doesn't implement keepalives or HTTP/1.1 properly, there are 2 environment variables which when set send a HTTP/1.0 with no keepalive. These are set via the SetEnv directive.

These are the force-proxy-request-1.0 and proxy-nokeepalive notes.

<Location /buggyappserver/>
ProxyPass http://buggyappserver:7001/foo/
SetEnv force-proxy-request-1.0 1
SetEnv proxy-nokeepalive 1
</Location>

Директива <Proxy>

Описание:
Container for directives applied to proxied resources
Синтаксис:
<Proxy wildcard-url> ...</Proxy>
Контекст:
server configvirtual host
Статус:
Расширение
Модуль:
mod_proxy

Directives placed in <Proxy> sections apply only to matching proxied content. Shell-style wildcards are allowed.

For example, the following will allow only hosts in yournetwork.example.com to access content via your proxy server:

<Proxy *>
Order Deny,Allow
Deny from all
Allow from yournetwork.example.com
</Proxy>

The following example will process all files in the foo directory of example.com through the INCLUDES filter when they are sent through the proxy server:

<Proxy http://example.com/foo/*>
SetOutputFilter INCLUDES
</Proxy>

Директива ProxyBadHeader

Описание:
Determines how to handle bad header lines in a response
Синтаксис:
ProxyBadHeader IsError|Ignore|StartBody
Значение по умолчанию:
ProxyBadHeader IsError
Контекст:
server configvirtual host
Статус:
Расширение
Модуль:
mod_proxy
Совместимость:
Available in Apache 2.0.44 and later

The ProxyBadHeader directive determines the behaviour of if it receives syntactically invalid header lines (i.e. containing no colon). The following arguments are possible:

IsError
Abort the request and end up with a 502 (Bad Gateway) response. This is the default behaviour.
Ignore
Treat bad header lines as if they weren't sent.
StartBody
When receiving the first bad header line, finish reading the headers and treat the remainder as body. This helps to work around buggy backend servers which forget to insert an empty line between the headers and the body.

Директива ProxyFtpDirCharset

Описание:
Define the character set for proxied FTP listings
Синтаксис:
ProxyFtpDirCharset character set
Значение по умолчанию:
ProxyFtpDirCharset ISO-8859-1
Контекст:
server configvirtual host directory
Статус:
Расширение
Модуль:
mod_proxy
Совместимость:
Available in Apache 2.0.62 and later

The ProxyFtpDirCharset directive defines the character set to be set for FTP directory listings in HTML generated by .

Директива <ProxyMatch>

Описание:
Container for directives applied to regular-expression-matched proxied resources
Синтаксис:
<ProxyMatch regex> ...</ProxyMatch>
Контекст:
server configvirtual host
Статус:
Расширение
Модуль:
mod_proxy

The <ProxyMatch> directive is identical to the <Proxy> directive, except it matches URLs using regular expressions.

Директива ProxyPreserveHost

Описание:
Use incoming Host HTTP request header for proxy request
Синтаксис:
ProxyPreserveHost On|Off
Значение по умолчанию:
ProxyPreserveHost Off
Контекст:
server configvirtual host
Статус:
Расширение
Модуль:
mod_proxy
Совместимость:
Available in Apache 2.0.31 and later.

When enabled, this option will pass the Host: line from the incoming request to the proxied host, instead of the hostname specified in the proxypass line.

This option should normally be turned Off. It is mostly useful in special configurations like proxied mass name-based virtual hosting, where the original Host header needs to be evaluated by the backend server.

Директива ProxyRequests

Описание:
Enables forward (standard) proxy requests
Синтаксис:
ProxyRequests On|Off
Значение по умолчанию:
ProxyRequests Off
Контекст:
server configvirtual host
Статус:
Расширение
Модуль:
mod_proxy

This allows or prevents Apache from functioning as a forward proxy server. (Setting ProxyRequests to Off does not disable use of the ProxyPass directive.)

In a typical reverse proxy configuration, this option should be set to Off.

In order to get the functionality of proxying HTTP or FTP sites, you need also or (or both) present in the server.

Warning

Do not enable proxying with ProxyRequests until you have . Open proxy servers are dangerous both to your network and to the Internet at large.

Директива ProxyRemote

Описание:
Remote proxy used to handle certain requests
Синтаксис:
ProxyRemote match remote-server
Контекст:
server configvirtual host
Статус:
Расширение
Модуль:
mod_proxy

This defines remote proxies to this proxy. match is either the name of a URL-scheme that the remote server supports, or a partial URL for which the remote server should be used, or * to indicate the server should be contacted for all requests. remote-server is a partial URL for the remote server. Syntax:

remote-server = scheme://hostname[:port]

scheme is effectively the protocol that should be used to communicate with the remote server; only http is supported by this module.

Example

ProxyRemote http://goodguys.com/ http://mirrorguys.com:8000
ProxyRemote * http://cleversite.com
ProxyRemote ftp http://ftpproxy.mydomain.com:8080

In the last example, the proxy will forward FTP requests, encapsulated as yet another HTTP proxy request, to another proxy which can handle them.

This option also supports reverse proxy configuration - a backend webserver can be embedded within a virtualhost URL space even if that server is hidden by another forward proxy.

Директива ProxyRemoteMatch

Описание:
Remote proxy used to handle requests matched by regular expressions
Синтаксис:
ProxyRemoteMatch regex remote-server
Контекст:
server configvirtual host
Статус:
Расширение
Модуль:
mod_proxy

The ProxyRemoteMatch is identical to the ProxyRemote directive, except the first argument is a regular expression match against the requested URL.

Директива ProxyPass

Описание:
Maps remote servers into the local server URL-space
Синтаксис:
ProxyPass [path] !|url
Контекст:
server configvirtual host directory
Статус:
Расширение
Модуль:
mod_proxy

This directive allows remote servers to be mapped into the space of the local server; the local server does not act as a proxy in the conventional sense, but appears to be a mirror of the remote server. path is the name of a local virtual path; url is a partial URL for the remote server and cannot include a query string.

Suppose the local server has address http://example.com/; then

ProxyPass /mirror/foo/ http://backend.example.com/

will cause a local request for http://example.com/mirror/foo/bar to be internally converted into a proxy request to http://backend.example.com/bar.

The ! directive is useful in situations where you don't want to reverse-proxy a subdirectory, e.g.

ProxyPass /mirror/foo/i !
ProxyPass /mirror/foo http://backend.example.com

will proxy all requests to /mirror/foo to backend.example.com except requests made to /mirror/foo/i.

Note

Order is important. you need to put the exclusions before the general proxypass directive.

When used inside a <Location> section, the first argument is omitted and the local directory is obtained from the <Location>.

The ProxyRequests directive should usually be set off when using ProxyPass.

If you require a more flexible reverse-proxy configuration, see the RewriteRule directive with the [P] flag.

Директива ProxyPassReverse

Описание:
Adjusts the URL in HTTP response headers sent from a reverse proxied server
Синтаксис:
ProxyPassReverse [path] url
Контекст:
server configvirtual host directory
Статус:
Расширение
Модуль:
mod_proxy

This directive lets Apache adjust the URL in the Location, Content-Location and URI headers on HTTP redirect responses. This is essential when Apache is used as a reverse proxy to avoid by-passing the reverse proxy because of HTTP redirects on the backend servers which stay behind the reverse proxy.

Only the HTTP response headers specifically mentioned above will be rewritten. Apache will not rewrite other response headers, nor will it rewrite URL references inside HTML pages. This means that if the proxied content contains absolute URL references, they will by-pass the proxy. A third-party module that will look inside the HTML and rewrite URL references is Nick Kew's .

path is the name of a local virtual path. url is a partial URL for the remote server - the same way they are used for the ProxyPass directive.

For example, suppose the local server has address http://example.com/; then

ProxyPass /mirror/foo/ http://backend.example.com/
ProxyPassReverse /mirror/foo/ http://backend.example.com/

will not only cause a local request for the http://example.com/mirror/foo/bar to be internally converted into a proxy request to http://backend.example.com/bar (the functionality ProxyPass provides here). It also takes care of redirects the server backend.example.com sends: when http://backend.example.com/bar is redirected by him to http://backend.example.com/quux Apache adjusts this to http://example.com/mirror/foo/quux before forwarding the HTTP redirect response to the client. Note that the hostname used for constructing the URL is chosen in respect to the setting of the UseCanonicalName directive.

Note that this ProxyPassReverse directive can also be used in conjunction with the proxy pass-through feature (RewriteRule ... [P]) from because its doesn't depend on a corresponding ProxyPass directive.

When used inside a <Location> section, the first argument is omitted and the local directory is obtained from the <Location>.

Директива AllowCONNECT

Описание:
Ports that are allowed to CONNECT through the proxy
Синтаксис:
AllowCONNECT port [port] ...
Значение по умолчанию:
AllowCONNECT 443 563
Контекст:
server configvirtual host
Статус:
Расширение
Модуль:
mod_proxy

The AllowCONNECT directive specifies a list of port numbers to which the proxy CONNECT method may connect. Today's browsers use this method when a https connection is requested and proxy tunneling over HTTP is in effect.

By default, only the default https port (443) and the default snews port (563) are enabled. Use the AllowCONNECT directive to override this default and allow connections to the listed ports only.

Note that you'll need to have present in the server in order to get the support for the CONNECT at all.

Директива ProxyBlock

Описание:
Words, hosts, or domains that are banned from being proxied
Синтаксис:
ProxyBlock *|word|host|domain [word|host|domain] ...
Контекст:
server configvirtual host
Статус:
Расширение
Модуль:
mod_proxy

The ProxyBlock directive specifies a list of words, hosts and/or domains, separated by spaces. HTTP, HTTPS, and FTP document requests to sites whose names contain matched words, hosts or domains are blocked by the proxy server. The proxy module will also attempt to determine IP addresses of list items which may be hostnames during startup, and cache them for match test as well. That may slow down the startup time of the server.

Example

ProxyBlock joes-garage.com some-host.co.uk rocky.wotsamattau.edu

rocky.wotsamattau.edu would also be matched if referenced by IP address.

Note that wotsamattau would also be sufficient to match wotsamattau.edu.

Note also that

ProxyBlock *

blocks connections to all sites.

Директива ProxyReceiveBufferSize

Описание:
Network buffer size for proxied HTTP and FTP connections
Синтаксис:
ProxyReceiveBufferSize bytes
Значение по умолчанию:
ProxyReceiveBufferSize 0
Контекст:
server configvirtual host
Статус:
Расширение
Модуль:
mod_proxy

The ProxyReceiveBufferSize directive specifies an explicit (TCP/IP) network buffer size for proxied HTTP and FTP connections, for increased throughput. It has to be greater than 512 or set to 0 to indicate that the system's default buffer size should be used.

Example

ProxyReceiveBufferSize 2048

Директива ProxyIOBufferSize

Описание:
Determine size of internal data throughput buffer
Синтаксис:
ProxyIOBufferSize bytes
Значение по умолчанию:
ProxyIOBufferSize 8192
Контекст:
server configvirtual host
Статус:
Расширение
Модуль:
mod_proxy

The ProxyIOBufferSize directive adjusts the size of the internal buffer, which is used as a scratchpad for the data between input and output. The size must be less or equal 8192.

In almost every case there's no reason to change that value.

Директива ProxyMaxForwards

Описание:
Maximium number of proxies that a request can be forwarded through
Синтаксис:
ProxyMaxForwards number
Значение по умолчанию:
ProxyMaxForwards 10
Контекст:
server configvirtual host
Статус:
Расширение
Модуль:
mod_proxy
Совместимость:
Available in Apache 2.0 and later

The ProxyMaxForwards directive specifies the maximum number of proxies through which a request may pass, if there's no Max-Forwards header supplied with the request. This is set to prevent infinite proxy loops, or a DoS attack.

Example

ProxyMaxForwards 15

Директива NoProxy

Описание:
Hosts, domains, or networks that will be connected to directly
Синтаксис:
NoProxy host [host] ...
Контекст:
server configvirtual host
Статус:
Расширение
Модуль:
mod_proxy

This directive is only useful for Apache proxy servers within intranets. The NoProxy directive specifies a list of subnets, IP addresses, hosts and/or domains, separated by spaces. A request to a host which matches one or more of these is always served directly, without forwarding to the configured ProxyRemote proxy server(s).

Example

ProxyRemote * http://firewall.mycompany.com:81
NoProxy .mycompany.com 192.168.112.0/21

The host arguments to the NoProxy directive are one of the following type list:

A Domain is a partially qualified DNS domain name, preceded by a period. It represents a list of hosts which logically belong to the same DNS domain or zone (i.e., the suffixes of the hostnames are all ending in Domain).

Examples

.com .apache.org.

To distinguish Domains from s (both syntactically and semantically; a DNS domain can have a DNS A record, too!), Domains are always written with a leading period.

Note

Domain name comparisons are done without regard to the case, and Domains are always assumed to be anchored in the root of the DNS tree, therefore two domains .MyDomain.com and .mydomain.com. (note the trailing period) are considered equal. Since a domain comparison does not involve a DNS lookup, it is much more efficient than subnet comparison.

A SubNet is a partially qualified internet address in numeric (dotted quad) form, optionally followed by a slash and the netmask, specified as the number of significant bits in the SubNet. It is used to represent a subnet of hosts which can be reached over a common network interface. In the absence of the explicit net mask it is assumed that omitted (or zero valued) trailing digits specify the mask. (In this case, the netmask can only be multiples of 8 bits wide.) Examples:

192.168 or 192.168.0.0
the subnet 192.168.0.0 with an implied netmask of 16 valid bits (sometimes used in the netmask form 255.255.0.0)
192.168.112.0/21
the subnet 192.168.112.0/21 with a netmask of 21 valid bits (also used in the form 255.255.248.0)

As a degenerate case, a SubNet with 32 valid bits is the equivalent to an , while a SubNet with zero valid bits (e.g., 0.0.0.0/0) is the same as the constant _Default_, matching any IP address.

A IPAddr represents a fully qualified internet address in numeric (dotted quad) form. Usually, this address represents a host, but there need not necessarily be a DNS domain name connected with the address.

Example

192.168.123.7

Note

An IPAddr does not need to be resolved by the DNS system, so it can result in more effective apache performance.

A Hostname is a fully qualified DNS domain name which can be resolved to one or more via the DNS domain name service. It represents a logical host (in contrast to s, see above) and must be resolvable to at least one (or often to a list of hosts with different s).

Examples

prep.ai.mit.edu
www.apache.org

Note

In many situations, it is more effective to specify an in place of a Hostname since a DNS lookup can be avoided. Name resolution in Apache can take a remarkable deal of time when the connection to the name server uses a slow PPP link.

Hostname comparisons are done without regard to the case, and Hostnames are always assumed to be anchored in the root of the DNS tree, therefore two hosts WWW.MyDomain.com and www.mydomain.com. (note the trailing period) are considered equal.

См. также

Директива ProxyTimeout

Описание:
Network timeout for proxied requests
Синтаксис:
ProxyTimeout seconds
Значение по умолчанию:
ProxyTimeout 300
Контекст:
server configvirtual host
Статус:
Расширение
Модуль:
mod_proxy
Совместимость:
Available in Apache 2.0.31 and later

This directive allows a user to specifiy a timeout on proxy requests. This is useful when you have a slow/buggy appserver which hangs, and you would rather just return a timeout and fail gracefully instead of waiting however long it takes the server to return.

Директива ProxyDomain

Описание:
Default domain name for proxied requests
Синтаксис:
ProxyDomain Domain
Контекст:
server configvirtual host
Статус:
Расширение
Модуль:
mod_proxy

This directive is only useful for Apache proxy servers within intranets. The ProxyDomain directive specifies the default domain which the apache proxy server will belong to. If a request to a host without a domain name is encountered, a redirection response to the same host with the configured Domain appended will be generated.

Example

ProxyRemote * http://firewall.mycompany.com:81
NoProxy .mycompany.com 192.168.112.0/21
ProxyDomain .mycompany.com

Директива ProxyVia

Описание:
Information provided in the Via HTTP response header for proxied requests
Синтаксис:
ProxyVia On|Off|Full|Block
Значение по умолчанию:
ProxyVia Off
Контекст:
server configvirtual host
Статус:
Расширение
Модуль:
mod_proxy

This directive controls the use of the Via: HTTP header by the proxy. Its intended use is to control the flow of of proxy requests along a chain of proxy servers. See (HTTP/1.1), section 14.45 for an explanation of Via: header lines.

  • If set to Off, which is the default, no special processing is performed. If a request or reply contains a Via: header, it is passed through unchanged.
  • If set to On, each request and reply will get a Via: header line added for the current host.
  • If set to Full, each generated Via: header line will additionally have the Apache server version shown as a Via: comment field.
  • If set to Block, every proxy request will have all its Via: header lines removed. No new Via: header will be generated.

Директива ProxyErrorOverride

Описание:
Override error pages for proxied content
Синтаксис:
ProxyErrorOverride On|Off
Значение по умолчанию:
ProxyErrorOverride Off
Контекст:
server configvirtual host
Статус:
Расширение
Модуль:
mod_proxy
Совместимость:
Available in version 2.0 and later

This directive is useful for reverse-proxy setups, where you want to have a common look and feel on the error pages seen by the end user. This also allows for included files (via mod_include's SSI) to get the error code and act accordingly (default behavior would display the error page of the proxied server, turning this on shows the SSI Error message).

comments powered by Disqus